MMCedu project - keyboard #2

This article describe little bit more in detail the plan for the keyboard to be used for the MMCEdu project.

Timer for UV box - final build - Hardware

Time to close also this project.
With the help of Roberto we did end up with a PCB, let's put it together.
This article describes some work on the hardware side.

Timer for UV box - final build - software

Once the hardware was ready, I resumed the code developed with Energia.


Let's see what I found.

MMCedu project - keyboard #1

This article is part of the MMCedu project (Magnetic Memory Core Education) and discusses about a keyboard to interact with the Magnetic Memory Core project.

Digital Encoder breakout

On many projects I use a digital encoder as input device (to set values, select, etc.).
In order to have more flexibility to put the encoder on panels, I usually manually wire it on a prototype board, every single time.

So it is time to have a standard way to deal with this.

Infinity Disney base

Information about the Disney Infinity base.
Going around antique mall I bough few bases.
I'm collecting here some information, would be nice to be able to use the NFC reader for other purposes.

EasyEDA

EasyEDA is a schematic CAD with PCB capabilities, like Eagle CAD, but running in the browser (I'm using Chrome).
For a project I started  I'm trying to use it for schematic and eventually for the PCB.
This is a brief review of my experience so far.

MMCedu project - Introduction

Time ago I wrote an article (Toroid tale) about my early experience in programming.
Electronics always fascinates me, especially digging deep about how things works, so ... here we go with some magnetic core explanations/experimentation and a retro-magnetic core building project, for fun and nostalgia lane.

Electronic components sources

I often need to buy some electronic components.

Where to look for components, tools, information ?

Teirmilab - final building

Ok, time to close the project.
This article will be updated to track the progress.